Make sure to get the measurements right, or you’ll end up with a house of cards when it’s time to set it all up! The plywood should be about 16 feet long, and the 2″ x 8″ lumber should be around 8 feet, making your DIY goat feeder about 4′ wide and 2.5′ high. Start laying out the parts of your DIY Goat Feeder.How do you build a DIY Goat Feeder trough at home? Materials of Goat Feeder: Make sure you don’t use anything with sharp edges because your goat may accidentally hurt himself trying to get at his feed. One of the things you will want to avoid is using an all-metal base, as most goat feeders are not made for heavy-duty use. This project is done over a large area, so using ordinary latex-based house paints won’t work due to the humidity in your barn. You can use paint that is stain resistant or designed to be used indoors. You also need various screws, nails, paint, and some paint brushes. I used 2″ lumber, 8′ long, but you can use any lumber that you want, and it’s up to you to find a good location for it. Finding a strong base is the most important part of making a Goat Feeder. I have made many feeders over the years and know exactly what to use. It is also made of materials resistant to mold, making it healthier for the goats. The completed project measures 4 feet by 2.5 feet and can hold up to 400 pounds of feed. This guide shows how to make a goat feeder with materials similar to those used in making a deck, such as lumber, screws, nails, and paint.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |